Set Powerlifting Elite Plate 150 Kg

The 150kg set of Powerlifting Elite Plate discs includes:

2x5kg

2x10kg

2x15kg

2x20kg

2x25kg

You can complete your set with the 1.25kg (PLPE1.25) and 2.5kg (PLPE2.5) special micro-loads reserved for the 0,250 and 0,500kg record.

The composition of the 150kg Powerlifting Elite Plate SET may vary according to the availability of the single components, for the technical specifications you can refer to the data sheet of each single product.

Lacertosus Olympic plates dedicated to Powerlifting, perfect in all situations where accurate weight and space-saving are required on the barbell.

The Powerlifting Elite Plates by Lacertosus are calibrated with small weight tolerances, for each size the color is compliant with the international IPF standards and it has been obtained in the hollow on the external section of the plate, allowing a quicker identification even when the plate is loaded on the barbell. Powerlifting Elite Plates are perfect in combination with the OB86-EPL barbell, specific for Powerlifting and OCP-E collars.

The Powerlifting ELITE Plates are made in stardard sizes from PL: 1.25 - 2.5 - 5 -10 – 15 – 20 - 25kg, as per IPF regulation, the 20kg and 25kg have an external diameter of 450mm. The whole range is compatible with Olympic barbells with a 50mm loading diameter and modular OB20 modular dumbbells.

When the Powerlifting ELITE Plates are used for exercises that involve ground contact, such as the deadlift, rubber floors with a minimum thickness of 20mm must be used.

Maybe you didn’t know that…

During Powerlifting competitions, the plates must be loaded on the barbell by following some rules, including the orientation of the plate faces: the first pair on the barbell must be inserted with the weight indications facing the inside of the bar, the subsequent pairs must have the indications facing outwards. Powerlifting Elite Plates are branded on both sides of the plate, simplifying and speeding up loading operations.